Search Results | "how to disassemble an acura mdx driver door handle"


How to Install Door Visor on Honda Accord 4 Door ‘03-06

Posted on 13 January 2014 by admin

Download How to Install Door Visor on Honda Accord 4 Door ‘03-06 – Installing the Front Door Visor 1. Lower the front door glass completely. Remove the door glass run channel from the door sash in the area shown. 2. Using isopropyl alcohol on a shop towel, clean the shaded area of the door sash. 3. Attach a strip of masking tape to the end of the small piece of adhesive backing at the front of the door visor. Fold back the end, and tape the end to the back of the door visor. 4. Attach a strip of the masking tape to the ends of the remaining adhesive backing, Fold back the ends, and tape the ends to the front of the door visor. 5. Attach the front bracket of the door visor to the door sash, and push the rear bracket on the door sash. Insert the front tab under the door mirror base. 6. Adjust the location of the door visor until the clearance between the door visor and the door sash trim is 5 mm at the rear of the door, with a 2 to 3 mm gap along the top edge of the door visor. There should be no clearance between the front tab and the door visor. 7. Make sure there is no clearance between the EPT seal and body at the front of the door visor.


Related Search :

=> honda accord rain visors => how to install lebra hood cover on 2004 honda accord 4 door => srx door handle install

Tag Posts :

, , , , , , , , , , , , , ,



Comments Off